空壓式對焊機 Air-pressure butt welding machine 

性能特點

1.采用臺灣款控制器

可實現對焊接過程的夾緊、焊接、頂鍛、維持、休止等參數進行分析調節控制，設備操作簡單，便于掌握。

2. 采用氣動杠桿式加壓

具備更大夾緊力, 確保在工件頂鍛焊接時不打滑，焊接性能更穩定；

頂鍛移動滑座采用雙導軌導向，精度高、耐磨性好、運動順暢平穩，確保工件對焊接口的一致性。

3. 成型好

電阻對焊工藝簡單，焊件的縮短量小、毛刺少，有利于簡化后道工序。

4. 用途廣泛

適用于低碳鋼、純銅、黃銅、不銹鋼、鋁等金屬的線材或直徑小于18mm的棒材的對焊。

Performance characteristic

1. K-Ⅱ series controller

Welding process can be realized on the clamp, welding, upset, maintenance, rest, and other parameters of conditioning control, the equipment is simple, easy grasp.

2. use of pneumatic lever-type pressurized

Have greater clamping force to ensure that the workpiece upset welding is not slippery, welding of a more stable;

Top mobile sliding on forging a dual track-oriented, high precision, wear resistance, and smooth movement smooth, welded interface to ensure the consistency of the workpiece.

3. Forming a good

Resistance welding process is simple, welding pieces of the small amount of shortening, less burr, is conducive to simplified procedures.

4. extensive use

Applicable to low-carbon steel, copper, brass, stainless steel, aluminum and other metal wire or the diameter of less than 18 mm in the welding rod.